{"title":"16mm Multilayer Crimp Fittings","description":"\u003cp\u003eMultilayer crimp fittings with at least one 16mm connection, for 16mm PEX-AL-PEX pipe.\u003c\/p\u003e\u003cp\u003eRifeng multilayer crimp fittings from Excel Industries, for 16mm, 20mm and 26mm PEX-AL-PEX multilayer pipe. Nickel-plated brass bodies, 304 stainless steel crimp sleeves with inspection windows and twin EPDM O-rings, rated to 95°C and 10 bar.\u003c\/p\u003e\u003cp\u003eMake the joint with a multilayer crimp\/press tool fitted with U or TH profile jaws for the pipe size. Cut the pipe square, then calibrate and deburr it before fitting. For hot and cold water and central heating - not for gas.\u003c\/p\u003e\u003cp\u003eMultilayer pipe sizes are outside diameters (16mm, 20mm, 26mm), so check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003eShop by size: \u003ca href=\"\/collections\/16mm-multilayer-crimp-fittings\"\u003e16mm\u003c\/a\u003e | \u003ca href=\"\/collections\/20mm-multilayer-crimp-fittings\"\u003e20mm\u003c\/a\u003e | \u003ca href=\"\/collections\/26mm-multilayer-crimp-fittings\"\u003e26mm\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eShop by type: \u003ca href=\"\/collections\/multilayer-crimp-couplings\"\u003eCouplings \u0026amp; Reducers\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-elbows\"\u003eElbows\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-tees\"\u003eTees\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-threaded-adaptors\"\u003eThreaded Adaptors\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-valves-end-caps\"\u003eValves \u0026amp; End Caps\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-wall-plates\"\u003eWall Plates\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-copper-compression-adaptors\"\u003eCopper \u0026amp; Compression Adaptors\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"16mm-multilayer-crimp-straight-coupling-mf1016","title":"16mm Multilayer Crimp Straight Coupling","description":"\u003cp\u003eA straight multilayer crimp coupling for joining two lengths of 16mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289463177558,"sku":"MF1016","price":2.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-straight-coupling-mf1016.png?v=1793311332"},{"product_id":"20mm-x-16mm-multilayer-crimp-reducing-coupling-mf102016","title":"20mm x 16mm Multilayer Crimp Reducing Coupling","description":"\u003cp\u003eA reducing multilayer crimp coupling for joining 20mm multilayer pipe to 16mm multilayer pipe in a straight line.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e20mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e20mm crimp x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/20mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF102016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761371\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289463800150,"sku":"MF102016","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/20mm-x-16mm-multilayer-crimp-reducing-coupling-mf102016.png?v=1793311344"},{"product_id":"1-2-inch-male-x-16mm-multilayer-crimp-adaptor-mf111216","title":"½\" Male x 16mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ½\" male iron (BSP) thread on one end and a 16mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" male iron (BSP) thread x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF111216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289464324438,"sku":"MF111216","price":2.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-male-x-16mm-multilayer-crimp-adaptor-mf111216.png?v=1793311346"},{"product_id":"16mm-multilayer-crimp-elbow-mf1516","title":"16mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow for changing direction on 16mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x 16mm crimp, 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1516\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761654\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289479790934,"sku":"MF1516","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-elbow-mf1516.png?v=1793311347"},{"product_id":"1-2-inch-female-x-16mm-multilayer-crimp-adaptor-mf121216","title":"½\" Female x 16mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ½\" female iron (BSP) thread on one end and a 16mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" female iron (BSP) thread x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF121216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761463\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289480479062,"sku":"MF121216","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-female-x-16mm-multilayer-crimp-adaptor-mf121216.png?v=1793311347"},{"product_id":"16mm-multilayer-crimp-equal-tee-mf1816","title":"16mm Multilayer Crimp Equal Tee","description":"\u003cp\u003eAn equal multilayer crimp tee for taking a 16mm branch off a 16mm multilayer pipe run.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp on all three ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761685\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289481462102,"sku":"MF1816","price":4.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-equal-tee-mf1816.png?v=1793311358"},{"product_id":"20mm-x-16mm-x-20mm-multilayer-crimp-reducing-tee-mf18201620","title":"20mm x 16mm x 20mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 20mm on one end, 20mm on the other end and a 16mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e20 x 16 x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 20mm x branch 16mm x end 20mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/20mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18201620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767908\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289482215766,"sku":"MF18201620","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/20mm-x-16mm-x-20mm-multilayer-crimp-reducing-tee-mf18201620.png?v=1793311360"},{"product_id":"26mm-x-16mm-x-26mm-multilayer-crimp-reducing-tee-mf18261626","title":"26mm x 16mm x 26mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 26mm on one end, 26mm on the other end and a 16mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26 x 16 x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 26mm x branch 16mm x end 26mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18261626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770366\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289500959062,"sku":"MF18261626","price":7.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-16mm-x-26mm-multilayer-crimp-reducing-tee-mf18261626.png?v=1793311361"},{"product_id":"20mm-x-16mm-x-16mm-multilayer-crimp-reducing-tee-mf18201616","title":"20mm x 16mm x 16mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 20mm on one end, 16mm on the other end and a 16mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e20 x 16 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 20mm x branch 16mm x end 16mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/20mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18201616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501188438,"sku":"MF18201616","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/20mm-x-16mm-x-16mm-multilayer-crimp-reducing-tee-mf18201616.png?v=1793311361"},{"product_id":"20mm-x-20mm-x-16mm-multilayer-crimp-reducing-tee-mf18202016","title":"20mm x 20mm x 16mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 20mm on one end, 16mm on the other end and a 20mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e20 x 20 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 20mm x branch 20mm x end 16mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/20mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18202016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761746\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501319510,"sku":"MF18202016","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/20mm-x-20mm-x-16mm-multilayer-crimp-reducing-tee-mf18202016.png?v=1793311372"},{"product_id":"16mm-multilayer-crimp-lever-ball-valve-mf16bv","title":"16mm Multilayer Crimp Lever Ball Valve","description":"\u003cp\u003eA lever action ball valve with 16mm crimp connections on both ends, for quick quarter-turn, full-flow shut-off on 16mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrass lever valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF16BV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269787968\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501909334,"sku":"MF16BV","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-lever-ball-valve-mf16bv.png?v=1793311373"},{"product_id":"16mm-multilayer-crimp-end-cap-mf5116","title":"16mm Multilayer Crimp End Cap","description":"\u003cp\u003eA multilayer crimp end cap for sealing off the end of a 16mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF5116\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761852\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289502892374,"sku":"MF5116","price":2.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-end-cap-mf5116.png?v=1793311375"},{"product_id":"16mm-multilayer-crimp-x-1-2-inch-copper-adaptor-mfad1612","title":"16mm Multilayer Crimp x ½\" Copper Adaptor","description":"\u003cp\u003eA adaptor for joining 16mm multilayer pipe to existing ½\" (14.7mm) copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x ½\" (14.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x ½\" (14.7mm) compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD1612\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761883\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289519833430,"sku":"MFAD1612","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-x-1-2-inch-copper-adaptor-mfad1612.png?v=1793311363"},{"product_id":"16mm-multilayer-crimp-x-1-2-inch-copper-elbow-adaptor-mfad1612e","title":"16mm Multilayer Crimp x ½\" Copper Elbow Adaptor","description":"\u003cp\u003eA 90° adaptor for joining 16mm multilayer pipe to existing ½\" (14.7mm) copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x ½\" (14.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x ½\" (14.7mm) compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD1612E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269775521\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289519997270,"sku":"MFAD1612E","price":4.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-x-1-2-inch-copper-elbow-adaptor-mfad1612e.png?v=1793311374"},{"product_id":"16mm-multilayer-crimp-range-x-1-2-inch-compression-connector-mpcc1612","title":"16mm Multilayer x ½\" Compression Connector (Crimp Range)","description":"\u003cp\u003eA chrome-plated connector core set (nut, split ring and insert) for connecting 16mm multilayer pipe straight into a ½\" compression port, such as on a valve, manifold or compression fitting. Part of the Rifeng multilayer crimp range, but this joint is made with a spanner, so no crimp tool is needed.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating, where multilayer pipe needs to go straight into a compression port. Calibrate and deburr the pipe, fit the nut and split ring, push the pipe onto the insert and tighten the nut. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm multilayer pipe into a ½\" compression port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eChrome-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCompression (nut, split ring and insert) - no crimp tool needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCalibrate and deburr before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMPCC1612\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269762026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289520095574,"sku":"MPCC1612","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-range-x-1-2-inch-compression-connector-mpcc1612.png?v=1793311375"},{"product_id":"26mm-x-16mm-multilayer-crimp-reducing-coupling-mf102616","title":"26mm x 16mm Multilayer Crimp Reducing Coupling","description":"\u003cp\u003eA reducing multilayer crimp coupling for joining 26mm multilayer pipe to 16mm multilayer pipe in a straight line.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF102616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767717\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55711675613526,"sku":"MF102616","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-16mm-multilayer-crimp-reducing-coupling-mf102616.png?v=1793310487"},{"product_id":"3-4-inch-female-x-16mm-multilayer-crimp-adaptor-mf123416","title":"¾\" Female x 16mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ¾\" female iron (BSP) thread on one end and a 16mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" female iron (BSP) thread x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF123416\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55711675842902,"sku":"MF123416","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-female-x-16mm-multilayer-crimp-adaptor-mf123416.png?v=1793310489"},{"product_id":"1-2-inch-swivel-female-x-16mm-multilayer-crimp-adaptor-mf261216","title":"½\" Swivel Female x 16mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ½\" female swivel nut (BSP thread) on one end and a 16mm crimp connection for multilayer pipe on the other. The loose nut lets you connect to a threaded valve, manifold or appliance tail without turning the fitting.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" female swivel nut (BSP thread) x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF261216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761524\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397357580630,"sku":"MF261216-CRIMP","price":2.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-swivel-female-x-16mm-multilayer-crimp-adaptor-mf261216.png?v=1793310378"},{"product_id":"1-2-inch-male-x-16mm-multilayer-crimp-elbow-mf161216","title":"½\" Male x 16mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow with a ½\" male iron (BSP) thread on one end and a 16mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" male iron (BSP) thread x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF161216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761579\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397366165846,"sku":"MF161216-CRIMP","price":2.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-male-x-16mm-multilayer-crimp-elbow-mf161216.png?v=1793310432"},{"product_id":"1-2-inch-female-x-16mm-multilayer-crimp-elbow-mf171216","title":"½\" Female x 16mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow with a ½\" female iron (BSP) thread on one end and a 16mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" female iron (BSP) thread x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF171216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397366788438,"sku":"MF171216-CRIMP","price":3.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-female-x-16mm-multilayer-crimp-elbow-mf171216.png?v=1793310443"},{"product_id":"16mm-x-20mm-x-16mm-multilayer-crimp-reducing-tee-mf18162016","title":"16mm x 20mm x 16mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 16mm on one end, 16mm on the other end and a 20mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16 x 20 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 16mm x branch 20mm x end 16mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/20mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18162016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761715\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367214422,"sku":"MF18162016-CRIMP","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-x-20mm-x-16mm-multilayer-crimp-reducing-tee-mf18162016.png?v=1793310451"},{"product_id":"16mm-multilayer-crimp-x-15mm-copper-adaptor-mfad1615","title":"16mm Multilayer Crimp x 15mm Copper Adaptor","description":"\u003cp\u003eA adaptor for joining 16mm multilayer pipe to existing 15mm copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x 15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x 15mm compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD1615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761890\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367279958,"sku":"MFAD1615-CRIMP","price":3.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-x-15mm-copper-adaptor-mfad1615.png?v=1793310452"},{"product_id":"16mm-multilayer-crimp-x-3-4-inch-copper-adaptor-mfad1634","title":"16mm Multilayer Crimp x ¾\" Copper Adaptor","description":"\u003cp\u003eA adaptor for joining 16mm multilayer pipe to existing ¾\" (21mm) copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x ¾\" (21mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x ¾\" (21mm) compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD1634\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367312726,"sku":"MFAD1634-CRIMP","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-x-3-4-inch-copper-adaptor-mfad1634.png?v=1793310453"},{"product_id":"16mm-x-1-2-inch-female-x-16mm-multilayer-crimp-tee-mf301612","title":"16mm x ½\" Female x 16mm Multilayer Crimp Tee","description":"\u003cp\u003eA multilayer crimp tee with 16mm crimp ends and a ½\" female iron (BSP) threaded branch, for teeing off to a tap, valve or radiator tail.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e16mm x ½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm crimp x ½\" female iron (BSP) branch x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF301612\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761814\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367837014,"sku":"MF301612-CRIMP","price":4.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-x-1-2-inch-female-x-16mm-multilayer-crimp-tee-mf301612.png?v=1793310462"},{"product_id":"1-2-inch-female-x-16mm-multilayer-crimp-wall-plate-elbow-mf17w1216","title":"½\" Female x 16mm Multilayer Crimp Wall Plate Elbow","description":"\u003cp\u003eA wall plate elbow with a ½\" female iron (BSP) outlet and a 16mm crimp connection, for fixing to a wall or noggin behind a tap, shower or appliance connection.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" female iron (BSP) outlet x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF17W1216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761838\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397368164694,"sku":"MF17W1216-CRIMP","price":4.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-2-inch-female-x-16mm-multilayer-crimp-wall-plate-elbow-mf17w1216.png?v=1793310470"},{"product_id":"16mm-multilayer-crimp-shower-valve-mounting-bracket-mf17w1216mb","title":"16mm Multilayer Crimp Shower Valve Mounting Bracket","description":"\u003cp\u003eA ½\" x 16mm shower valve mounting bracket from the multilayer crimp range: a steel mounting rail for fixing a pair of ½\" female x 16mm crimp wall plate elbows at the right centres for a shower valve. Supplied complete with red and blue blanking plugs for pressure testing.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e½\" x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e½\" female iron (BSP) outlets x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eSteel mounting rail with brass wall plate elbows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF17W1216MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397368361302,"sku":"MF17W1216MB-CRIMP","price":28.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-shower-valve-mounting-bracket-mf17w1216mb.png?v=1793310472"},{"product_id":"16mm-multilayer-crimp-range-x-15mm-compression-connector-mpcc1615","title":"16mm Multilayer x 15mm Compression Connector (Crimp Range)","description":"\u003cp\u003eA chrome-plated connector core set (nut, split ring and insert) for connecting 16mm multilayer pipe straight into a 15mm compression port, such as on a valve, manifold or compression fitting. Part of the Rifeng multilayer crimp range, but this joint is made with a spanner, so no crimp tool is needed.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating, where multilayer pipe needs to go straight into a compression port. Calibrate and deburr the pipe, fit the nut and split ring, push the pipe onto the insert and tighten the nut. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e15 x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e16mm multilayer pipe into a 15mm compression port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eChrome-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCompression (nut, split ring and insert) - no crimp tool needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCalibrate and deburr before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMPCC1615\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e8025459042793\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397368394070,"sku":"MPCC1615-CRIMP","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/16mm-multilayer-crimp-range-x-15mm-compression-connector-mpcc1615.png?v=1793310473"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/collections\/16mm-multilayer-crimp-fittings-tile.png?v=1793309531","url":"https:\/\/www.dynamitehardware.com\/collections\/16mm-multilayer-crimp-fittings.oembed","provider":"Dynamite Hardware","version":"1.0","type":"link"}