{"title":"26mm Multilayer Crimp Fittings","description":"\u003cp\u003eMultilayer crimp fittings with at least one 26mm connection, for 26mm PEX-AL-PEX pipe.\u003c\/p\u003e\u003cp\u003eRifeng multilayer crimp fittings from Excel Industries, for 16mm, 20mm and 26mm PEX-AL-PEX multilayer pipe. Nickel-plated brass bodies, 304 stainless steel crimp sleeves with inspection windows and twin EPDM O-rings, rated to 95°C and 10 bar.\u003c\/p\u003e\u003cp\u003eMake the joint with a multilayer crimp\/press tool fitted with U or TH profile jaws for the pipe size. Cut the pipe square, then calibrate and deburr it before fitting. For hot and cold water and central heating - not for gas.\u003c\/p\u003e\u003cp\u003eMultilayer pipe sizes are outside diameters (16mm, 20mm, 26mm), so check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003eShop by size: \u003ca href=\"\/collections\/16mm-multilayer-crimp-fittings\"\u003e16mm\u003c\/a\u003e | \u003ca href=\"\/collections\/20mm-multilayer-crimp-fittings\"\u003e20mm\u003c\/a\u003e | \u003ca href=\"\/collections\/26mm-multilayer-crimp-fittings\"\u003e26mm\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eShop by type: \u003ca href=\"\/collections\/multilayer-crimp-couplings\"\u003eCouplings \u0026amp; Reducers\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-elbows\"\u003eElbows\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-tees\"\u003eTees\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-threaded-adaptors\"\u003eThreaded Adaptors\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-valves-end-caps\"\u003eValves \u0026amp; End Caps\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-wall-plates\"\u003eWall Plates\u003c\/a\u003e | \u003ca href=\"\/collections\/multilayer-crimp-copper-compression-adaptors\"\u003eCopper \u0026amp; Compression Adaptors\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"26mm-multilayer-crimp-straight-coupling-mf1026","title":"26mm Multilayer Crimp Straight Coupling","description":"\u003cp\u003eA straight multilayer crimp coupling for joining two lengths of 26mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767687\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289463603542,"sku":"MF1026","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-straight-coupling-mf1026.png?v=1793311333"},{"product_id":"26mm-x-20mm-multilayer-crimp-reducing-coupling-mf102620","title":"26mm x 20mm Multilayer Crimp Reducing Coupling","description":"\u003cp\u003eA reducing multilayer crimp coupling for joining 26mm multilayer pipe to 20mm multilayer pipe in a straight line.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 20mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 20mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 20mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF102620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767700\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289463996758,"sku":"MF102620","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-20mm-multilayer-crimp-reducing-coupling-mf102620.png?v=1793311345"},{"product_id":"3-4-inch-male-x-26mm-multilayer-crimp-adaptor-mf113426","title":"¾\" Male x 26mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ¾\" male iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" male iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF113426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767731\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289464783190,"sku":"MF113426","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-male-x-26mm-multilayer-crimp-adaptor-mf113426.png?v=1793311346"},{"product_id":"1-inch-male-x-26mm-multilayer-crimp-adaptor-mf11126","title":"1\" Male x 26mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a 1\" male iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\" male iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF11126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767748\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289464881494,"sku":"MF11126","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-inch-male-x-26mm-multilayer-crimp-adaptor-mf11126.png?v=1793311348"},{"product_id":"26mm-multilayer-crimp-elbow-mf1526","title":"26mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow for changing direction on 26mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 26mm crimp, 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1526\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767816\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289480315222,"sku":"MF1526","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-elbow-mf1526.png?v=1793311359"},{"product_id":"3-4-inch-female-x-26mm-multilayer-crimp-adaptor-mf123426","title":"¾\" Female x 26mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ¾\" female iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" female iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF123426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767762\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289481003350,"sku":"MF123426","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-female-x-26mm-multilayer-crimp-adaptor-mf123426.png?v=1793311358"},{"product_id":"26mm-multilayer-crimp-equal-tee-mf1826","title":"26mm Multilayer Crimp Equal Tee","description":"\u003cp\u003eAn equal multilayer crimp tee for taking a 26mm branch off a 26mm multilayer pipe run.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp on all three ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF1826\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767878\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289481920854,"sku":"MF1826","price":9.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-equal-tee-mf1826.png?v=1793311361"},{"product_id":"26mm-x-16mm-x-26mm-multilayer-crimp-reducing-tee-mf18261626","title":"26mm x 16mm x 26mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 26mm on one end, 26mm on the other end and a 16mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26 x 16 x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 26mm x branch 16mm x end 26mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18261626\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770366\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289500959062,"sku":"MF18261626","price":7.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-16mm-x-26mm-multilayer-crimp-reducing-tee-mf18261626.png?v=1793311361"},{"product_id":"26mm-x-20mm-x-26mm-multilayer-crimp-reducing-tee-mf18262026","title":"26mm x 20mm x 26mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 26mm on one end, 26mm on the other end and a 20mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26 x 20 x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 26mm x branch 20mm x end 26mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 20mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 20mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18262026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269761739\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501122902,"sku":"MF18262026","price":7.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-20mm-x-26mm-multilayer-crimp-reducing-tee-mf18262026.png?v=1793311361"},{"product_id":"26mm-x-20mm-x-20mm-multilayer-crimp-reducing-tee-mf18262020","title":"26mm x 20mm x 20mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 26mm on one end, 20mm on the other end and a 20mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26 x 20 x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 26mm x branch 20mm x end 20mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 20mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 20mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18262020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767922\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501221206,"sku":"MF18262020","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-20mm-x-20mm-multilayer-crimp-reducing-tee-mf18262020.png?v=1793311362"},{"product_id":"26mm-x-26mm-x-20mm-multilayer-crimp-reducing-tee-mf18262620","title":"26mm x 26mm x 20mm Multilayer Crimp Reducing Tee","description":"\u003cp\u003eA reducing multilayer crimp tee: 26mm on one end, 20mm on the other end and a 26mm branch. Sizes are read end x branch x end, as in the Excel catalogue.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26 x 26 x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eEnd 26mm x branch 26mm x end 20mm (all crimp)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 20mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 20mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF18262620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767915\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289501450582,"sku":"MF18262620","price":7.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-26mm-x-20mm-multilayer-crimp-reducing-tee-mf18262620.png?v=1793311372"},{"product_id":"26mm-multilayer-crimp-lever-ball-valve-mf26bv","title":"26mm Multilayer Crimp Lever Ball Valve","description":"\u003cp\u003eA lever action ball valve with 26mm crimp connections on both ends, for quick quarter-turn, full-flow shut-off on 26mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eBrass lever valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF26BV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269787982\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289502237014,"sku":"MF26BV","price":12.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-lever-ball-valve-mf26bv.png?v=1793311375"},{"product_id":"26mm-multilayer-crimp-range-x-1-inch-compression-connector-mpcc261b","title":"26mm Multilayer x 1\" Compression Connector (Crimp Range)","description":"\u003cp\u003eA brass connector core set (nut, split ring and insert) for connecting 26mm multilayer pipe straight into a 1\" compression port, such as on a valve, manifold or compression fitting. Part of the Rifeng multilayer crimp range, but this joint is made with a spanner, so no crimp tool is needed.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating, where multilayer pipe needs to go straight into a compression port. Calibrate and deburr the pipe, fit the nut and split ring, push the pipe onto the insert and tighten the nut. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm multilayer pipe into a 1\" compression port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCompression (nut, split ring and insert) - no crimp tool needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCalibrate and deburr before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMPCC261B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e8025459053478\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55289520652630,"sku":"MPCC261B","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-range-x-1-inch-compression-connector-mpcc261b.png?v=1793311377"},{"product_id":"26mm-x-16mm-multilayer-crimp-reducing-coupling-mf102616","title":"26mm x 16mm Multilayer Crimp Reducing Coupling","description":"\u003cp\u003eA reducing multilayer crimp coupling for joining 26mm multilayer pipe to 16mm multilayer pipe in a straight line.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 16mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 16mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 16mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF102616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767717\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":55711675613526,"sku":"MF102616","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-16mm-multilayer-crimp-reducing-coupling-mf102616.png?v=1793310487"},{"product_id":"1-inch-female-x-26mm-multilayer-crimp-adaptor-mf12126","title":"1\" Female x 26mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a 1\" female iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\" female iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF12126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767779\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397353648470,"sku":"MF12126-CRIMP","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-inch-female-x-26mm-multilayer-crimp-adaptor-mf12126.png?v=1793310364"},{"product_id":"26mm-x-20mm-multilayer-crimp-reducing-elbow-mf152620","title":"26mm x 20mm Multilayer Crimp Reducing Elbow","description":"\u003cp\u003eA 90° reducing multilayer crimp elbow for joining 26mm multilayer pipe to 20mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 20mm crimp, 90°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 20mm\/26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 20mm\/26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF152620\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269787944\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397353746774,"sku":"MF152620-CRIMP","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-20mm-multilayer-crimp-reducing-elbow-mf152620.png?v=1793310365"},{"product_id":"3-4-inch-swivel-female-x-26mm-multilayer-crimp-adaptor-mf263426","title":"¾\" Swivel Female x 26mm Multilayer Crimp Adaptor","description":"\u003cp\u003eA straight multilayer crimp adaptor with a ¾\" female swivel nut (BSP thread) on one end and a 26mm crimp connection for multilayer pipe on the other. The loose nut lets you connect to a threaded valve, manifold or appliance tail without turning the fitting.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" female swivel nut (BSP thread) x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF263426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767793\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397366133078,"sku":"MF263426-CRIMP","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-swivel-female-x-26mm-multilayer-crimp-adaptor-mf263426.png?v=1793310431"},{"product_id":"3-4-inch-male-x-26mm-multilayer-crimp-elbow-mf163426","title":"¾\" Male x 26mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow with a ¾\" male iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" male iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF163426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767830\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397366591830,"sku":"MF163426-CRIMP","price":5.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-male-x-26mm-multilayer-crimp-elbow-mf163426.png?v=1793310441"},{"product_id":"1-inch-male-x-26mm-multilayer-crimp-elbow-mf16126","title":"1\" Male x 26mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow with a 1\" male iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e1\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e1\" male iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF16126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770359\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397366690134,"sku":"MF16126-CRIMP","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/1-inch-male-x-26mm-multilayer-crimp-elbow-mf16126.png?v=1793310443"},{"product_id":"3-4-inch-female-x-26mm-multilayer-crimp-elbow-mf173426","title":"¾\" Female x 26mm Multilayer Crimp Elbow","description":"\u003cp\u003eA 90° multilayer crimp elbow with a ¾\" female iron (BSP) thread on one end and a 26mm crimp connection for multilayer pipe on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e¾\" female iron (BSP) thread x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF173426\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767854\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367148886,"sku":"MF173426-CRIMP","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/3-4-inch-female-x-26mm-multilayer-crimp-elbow-mf173426.png?v=1793310451"},{"product_id":"26mm-multilayer-crimp-x-3-4-inch-copper-adaptor-mfad2634","title":"26mm Multilayer Crimp x ¾\" Copper Adaptor","description":"\u003cp\u003eA adaptor for joining 26mm multilayer pipe to existing ¾\" (21mm) copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x ¾\" (21mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x ¾\" (21mm) compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD2634\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367673174,"sku":"MFAD2634-CRIMP","price":6.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-x-3-4-inch-copper-adaptor-mfad2634.png?v=1793310460"},{"product_id":"26mm-multilayer-crimp-x-1-inch-copper-adaptor-mfad261","title":"26mm Multilayer Crimp x 1\" Copper Adaptor","description":"\u003cp\u003eA adaptor for joining 26mm multilayer pipe to existing 1\" (27.4mm) copper or PEX pipe: a crimp connection on the multilayer side and a compression nut and olive on the other.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x 1\" (27.4mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x 1\" (27.4mm) compression for copper or PEX pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMFAD261\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367738710,"sku":"MFAD261-CRIMP","price":8.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-x-1-inch-copper-adaptor-mfad261.png?v=1793310461"},{"product_id":"26mm-x-3-4-inch-female-x-26mm-multilayer-crimp-tee-mf302634","title":"26mm x ¾\" Female x 26mm Multilayer Crimp Tee","description":"\u003cp\u003eA multilayer crimp tee with 26mm crimp ends and a ¾\" female iron (BSP) threaded branch, for teeing off to a tap, valve or radiator tail.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm x ¾\" x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp x ¾\" female iron (BSP) branch x 26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF302634\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767946\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397367935318,"sku":"MF302634-CRIMP","price":8.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-x-3-4-inch-female-x-26mm-multilayer-crimp-tee-mf302634.png?v=1793310462"},{"product_id":"26mm-multilayer-crimp-end-cap-mf5126","title":"26mm Multilayer Crimp End Cap","description":"\u003cp\u003eA multilayer crimp end cap for sealing off the end of a 26mm multilayer pipe.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating on PEX-AL-PEX multilayer pipe. Cut the pipe square, calibrate and deburr it, push it fully home (check through the inspection windows in the stainless sleeve), then crimp with a press tool fitted with U or TH profile jaws for the pipe size. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm crimp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003eNickel-plated brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrimp sleeve\u003c\/th\u003e\n\u003ctd\u003e304 stainless steel with inspection windows\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003e2 x EPDM O-rings on each crimp insert\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw profile\u003c\/th\u003e\n\u003ctd\u003eU or TH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax temperature\u003c\/th\u003e\n\u003ctd\u003e95°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax working pressure\u003c\/th\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCut square, calibrate and deburr (ream) before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTool needed\u003c\/th\u003e\n\u003ctd\u003eMultilayer crimp\/press tool with 26mm U or TH jaws (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMF5126\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269767960\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397368492374,"sku":"MF5126-CRIMP","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-end-cap-mf5126.png?v=1793310474"},{"product_id":"26mm-multilayer-crimp-range-x-28mm-compression-connector-mpcc2628b","title":"26mm Multilayer x 28mm Compression Connector (Crimp Range)","description":"\u003cp\u003eA brass connector core set (nut, split ring and insert) for connecting 26mm multilayer pipe straight into a 28mm compression port, such as on a valve, manifold or compression fitting. Part of the Rifeng multilayer crimp range, but this joint is made with a spanner, so no crimp tool is needed.\u003c\/p\u003e\u003ch3\u003eTypical uses\u003c\/h3\u003e\u003cp\u003eHot and cold water and central heating, where multilayer pipe needs to go straight into a compression port. Calibrate and deburr the pipe, fit the nut and split ring, push the pipe onto the insert and tighten the nut. Not for gas.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e28 x 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConnections\u003c\/th\u003e\n\u003ctd\u003e26mm multilayer pipe into a 28mm compression port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRange\u003c\/th\u003e\n\u003ctd\u003eRifeng multilayer crimp (Excel Industries)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJoint\u003c\/th\u003e\n\u003ctd\u003eCompression (nut, split ring and insert) - no crimp tool needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe\u003c\/th\u003e\n\u003ctd\u003ePEX-AL-PEX multilayer pipe, 26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePipe preparation\u003c\/th\u003e\n\u003ctd\u003eCalibrate and deburr before fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eHot and cold water, central heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNot suitable for\u003c\/th\u003e\n\u003ctd\u003eGas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSold\u003c\/th\u003e\n\u003ctd\u003eIndividually - price is per piece, incl. VAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer pack\u003c\/th\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eExcel Industries (Rifeng range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExcel code\u003c\/th\u003e\n\u003ctd\u003eMPCC2628B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBarcode (EAN)\u003c\/th\u003e\n\u003ctd\u003e5391269770540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMultilayer pipe sizes (16mm, 20mm, 26mm) are outside diameters - check your pipe and jaw profile before ordering.\u003c\/p\u003e\u003cp\u003e\u003csmall\u003eSpecifications from Excel Industries (catalogue Issue 26.7, Rifeng multilayer fittings, pages 28-30). Images are catalogue photos with sizes added.\u003c\/small\u003e\u003c\/p\u003e","brand":"Excel Industries","offers":[{"title":"Default Title","offer_id":56397368623446,"sku":"MPCC2628B-CRIMP","price":12.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/26mm-multilayer-crimp-range-x-28mm-compression-connector-mpcc2628b.png?v=1793310474"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/collections\/26mm-multilayer-crimp-fittings-tile.png?v=1793309538","url":"https:\/\/www.dynamitehardware.com\/collections\/26mm-multilayer-crimp-fittings.oembed","provider":"Dynamite Hardware","version":"1.0","type":"link"}