{"title":"Projecting Bolt Shield Anchors","description":"\u003cp\u003e\u003cstrong\u003eProjecting Bolt Shield Anchors\u003c\/strong\u003e have a stud that projects from the shield, so you set the anchor first and then hang the fixture over it and tighten the nut. Ideal for gates, heavy brackets and anything that needs lining up.\u003c\/p\u003e\u003cp\u003eChoose from 9 sizes in lengths from 70mm to 165mm. The size in brackets (e.g. 10P) is the maximum fixture thickness in mm.\u003c\/p\u003e\u003cp\u003eCompare \u003ca href=\"\/collections\/loose-bolt-shield-anchors\"\u003eloose bolt shield anchors\u003c\/a\u003e or \u003ca href=\"\/collections\/shield-anchors-only\"\u003eshield anchors (shield only)\u003c\/a\u003e, or shop the full \u003ca href=\"\/collections\/shield-anchors\"\u003eShield Anchors – Projecting \u0026amp; Loose Bolt\u003c\/a\u003e range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStarting at €25.99\u003c\/strong\u003e inc. VAT. Collect in Palmerstown, Dublin 20 or get delivery across Ireland.\u003c\/p\u003e","products":[{"product_id":"projecting-bolt-shield-anchors-m8-x-70mm-10p-box-of-50","title":"Projecting Bolt Shield Anchors M8 x 70mm (10P) – Box of 50","description":"\u003cp\u003eM8 shield anchors, zinc and yellow passivated, box of 50. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (10mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e0810PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM8 x 70mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563715\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 10mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-120mm-60p-box-of-50\"\u003eM8 x 120mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-85mm-25p-box-of-50\"\u003eM8 x 85mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730146646,"sku":"0810PSH","price":61.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m8-x-70mm-10p-box-of-50.png?v=1793448493"},{"product_id":"projecting-bolt-shield-anchors-m8-x-120mm-60p-box-of-50","title":"Projecting Bolt Shield Anchors M8 x 120mm (60P) – Box of 50","description":"\u003cp\u003eM8 shield anchors, zinc and yellow passivated, box of 50. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (60mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e0860PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM8 x 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563739\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 60mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-70mm-10p-box-of-50\"\u003eM8 x 70mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-85mm-25p-box-of-50\"\u003eM8 x 85mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730179414,"sku":"0860PSH","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m8-x-120mm-60p-box-of-50.png?v=1793448494"},{"product_id":"projecting-bolt-shield-anchors-m8-x-85mm-25p-box-of-50","title":"Projecting Bolt Shield Anchors M8 x 85mm (25P) – Box of 50","description":"\u003cp\u003eM8 shield anchors, zinc and yellow passivated, box of 50. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (25mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e0825PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM8 x 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 25mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-120mm-60p-box-of-50\"\u003eM8 x 120mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m8-x-70mm-10p-box-of-50\"\u003eM8 x 70mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730212182,"sku":"0825PSH","price":64.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m8-x-85mm-25p-box-of-50.png?v=1793448494"},{"product_id":"projecting-bolt-shield-anchors-m10-x-85mm-15p-box-of-25","title":"Projecting Bolt Shield Anchors M10 x 85mm (15P) – Box of 25","description":"\u003cp\u003eM10 shield anchors, zinc and yellow passivated, box of 25. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (15mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1015PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM10 x 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563746\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 15mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-100mm-30p-box-of-25\"\u003eM10 x 100mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-130mm-60p-box-of-25\"\u003eM10 x 130mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730244950,"sku":"1015PSH","price":40.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m10-x-85mm-15p-box-of-25.png?v=1793448495"},{"product_id":"projecting-bolt-shield-anchors-m10-x-100mm-30p-box-of-25","title":"Projecting Bolt Shield Anchors M10 x 100mm (30P) – Box of 25","description":"\u003cp\u003eM10 shield anchors, zinc and yellow passivated, box of 25. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (30mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1030PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM10 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563753\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 30mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-130mm-60p-box-of-25\"\u003eM10 x 130mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-85mm-15p-box-of-25\"\u003eM10 x 85mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730310486,"sku":"1030PSH","price":44.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m10-x-100mm-30p-box-of-25.png?v=1793448495"},{"product_id":"projecting-bolt-shield-anchors-m10-x-130mm-60p-box-of-25","title":"Projecting Bolt Shield Anchors M10 x 130mm (60P) – Box of 25","description":"\u003cp\u003eM10 shield anchors, zinc and yellow passivated, box of 25. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (60mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1060PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM10 x 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 60mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-100mm-30p-box-of-25\"\u003eM10 x 100mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m10-x-85mm-15p-box-of-25\"\u003eM10 x 85mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730343254,"sku":"1060PSH","price":47.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m10-x-130mm-60p-box-of-25.png?v=1793448495"},{"product_id":"projecting-bolt-shield-anchors-m12-x-120mm-30p-box-of-10","title":"Projecting Bolt Shield Anchors M12 x 120mm (30P) – Box of 10","description":"\u003cp\u003eM12 shield anchors, zinc and yellow passivated, box of 10. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (30mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1230PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM12 x 120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563784\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 30mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-105mm-15p-box-of-10\"\u003eM12 x 105mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-165mm-75p-box-of-10\"\u003eM12 x 165mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730376022,"sku":"1230PSH","price":30.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m12-x-120mm-30p-box-of-10.png?v=1793448496"},{"product_id":"projecting-bolt-shield-anchors-m12-x-105mm-15p-box-of-10","title":"Projecting Bolt Shield Anchors M12 x 105mm (15P) – Box of 10","description":"\u003cp\u003eM12 shield anchors, zinc and yellow passivated, box of 10. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (15mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1215PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM12 x 105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563777\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 15mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-120mm-30p-box-of-10\"\u003eM12 x 120mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-165mm-75p-box-of-10\"\u003eM12 x 165mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730408790,"sku":"1215PSH","price":25.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m12-x-105mm-15p-box-of-10.png?v=1793448496"},{"product_id":"projecting-bolt-shield-anchors-m12-x-165mm-75p-box-of-10","title":"Projecting Bolt Shield Anchors M12 x 165mm (75P) – Box of 10","description":"\u003cp\u003eM12 shield anchors, zinc and yellow passivated, box of 10. The classic heavy-duty expansion anchor – the four-segment shield opens as the bolt is tightened, gripping solid concrete, brick and block with a high, reliable hold.\u003c\/p\u003e\u003cp\u003eThis version is supplied with a projecting stud (75mm max. fixture thickness), so the fixture can be hung in place before the nut is tightened. Ideal for gates, railings, brackets, racking and heavy fixtures where a removable bolted fixing is needed.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty segmented expansion shield\u003c\/li\u003e\n\u003cli\u003eSuitable for concrete, solid brick and block\u003c\/li\u003e\n\u003cli\u003eProjecting stud – hang the fixture, then tighten\u003c\/li\u003e\n\u003cli\u003eRemovable bolted fixing\u003c\/li\u003e\n\u003cli\u003eZinc \u0026amp; yellow passivated finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e1275PSH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM12 x 165mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc \u0026amp; yellow passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017563791\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eGates and gate posts, railings and balustrades, brackets, racking, machinery, signage and heavy fixtures into concrete, solid brick and block. For internal or sheltered use.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eShield anchor or throughbolt – which should I use?\u003c\/h3\u003e\u003cp\u003eShield anchors work in concrete, solid brick and block and allow the bolt to be removed. \u003ca href=\"\/collections\/throughbolts\"\u003eThroughbolts\u003c\/a\u003e are quicker to install but are designed for solid concrete only.\u003c\/p\u003e\u003ch3\u003eWhat does the P or L number mean?\u003c\/h3\u003e\u003cp\u003eThe number is the maximum fixture thickness in millimetres – 75mm for this anchor. P means a projecting stud, L means a loose bolt.\u003c\/p\u003e\u003ch3\u003eWhat size hole do I drill?\u003c\/h3\u003e\u003cp\u003eDrill to the outside diameter of the shield (not the bolt size) and slightly deeper than the shield length. Always clean the hole before inserting the anchor.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eNo – shield anchors need a solid substrate. For hollow block or brick use \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resin with a resin sleeve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eOther sizes in this range: \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-105mm-15p-box-of-10\"\u003eM12 x 105mm\u003c\/a\u003e, \u003ca href=\"\/products\/projecting-bolt-shield-anchors-m12-x-120mm-30p-box-of-10\"\u003eM12 x 120mm\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/shield-anchors\"\u003eshield anchors\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e and \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730441558,"sku":"1275PSH","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/projecting-bolt-shield-anchors-m12-x-165mm-75p-box-of-10.png?v=1793448496"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/collections\/projecting-bolt-shield-anchors.jpg?v=1793462219","url":"https:\/\/www.dynamitehardware.com\/collections\/projecting-bolt-shield-anchors.oembed","provider":"Dynamite Hardware","version":"1.0","type":"link"}