{"product_id":"chemical-anchor-studs-m8-x-110mm-zinc-plated-with-nuts-and-washers-box-of-10","title":"Chemical Anchor Studs M8 x 110mm Zinc Plated with Nuts \u0026 Washers – Box of 10","description":"\u003cp\u003eM8 x 110mm chemical anchor studs, zinc plated, box of 10 complete with hex full nuts, Form A washers and a nut setter. Set in chemical resin they give a stress-free, high-load fixing in concrete, solid and hollow masonry – with no expansion forces, so they can be used close to edges.\u003c\/p\u003e\u003cp\u003eThe chisel point cuts through the resin as the stud is inserted for a thorough mix and full bond along the thread.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-cut threaded stud with chisel point\u003c\/li\u003e\n\u003cli\u003eSupplied with hex full nuts and Form A washers\u003c\/li\u003e\n\u003cli\u003eNut setter included for driving with a drill\u003c\/li\u003e\n\u003cli\u003eZinc plated for internal use\u003c\/li\u003e\n\u003cli\u003eNo expansion stress – fix close to edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eTIMCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer code\u003c\/th\u003e\n\u003ctd\u003e08110CS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eM8 x 110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePoint\u003c\/th\u003e\n\u003ctd\u003eChisel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixture hole Ø\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrill hole Ø\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003e5mm Nut Setter (Qty 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHole depth\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Ø\u003c\/th\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNut size\u003c\/th\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosion rating (scale 1–5)\u003c\/th\u003e\n\u003ctd\u003e1 – Clean, dry \u0026amp; low humidity environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWasher type\u003c\/th\u003e\n\u003ctd\u003eForm A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Ø x length\u003c\/th\u003e\n\u003ctd\u003eM8 x 110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWasher size\u003c\/th\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax. fixture thickness\u003c\/th\u003e\n\u003ctd\u003e13mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNut type\u003c\/th\u003e\n\u003ctd\u003eHex Full\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003ctd\u003eBox of 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEAN\u003c\/th\u003e\n\u003ctd\u003e5055017564941\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003e\u003cem\u003ePackaging may vary from the image shown. Supplied as specified.\u003c\/em\u003e\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eHeavy brackets, steelwork, balustrades, canopies, racking, signage and machinery into concrete, solid brick and block, and hollow masonry with a resin sleeve. Use with our \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical resins\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\u003ch3\u003eWhat size hole do I drill for M8 studs?\u003c\/h3\u003e\u003cp\u003eDrill a 10mm hole to a depth of 80mm, then clean it thoroughly with a blow-out pump and brush before injecting resin.\u003c\/p\u003e\u003ch3\u003eWhich resin should I use?\u003c\/h3\u003e\u003cp\u003ePolyester resin suits general-purpose fixing into masonry; vinylester resin gives higher performance in concrete and damp holes. Check the cartridge for curing times.\u003c\/p\u003e\u003ch3\u003eZinc or galvanised?\u003c\/h3\u003e\u003cp\u003eZinc-plated studs are for dry, internal environments. Hot dip galvanised studs have a corrosion rating of 4 and are the choice for external work.\u003c\/p\u003e\u003ch3\u003eCan I use them in hollow block?\u003c\/h3\u003e\u003cp\u003eYes – use a resin sleeve in the hole so the resin is contained and keys around the cavities.\u003c\/p\u003e\n\u003ch2\u003eOther sizes and related products\u003c\/h2\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/chemical-anchoring\"\u003echemical anchoring\u003c\/a\u003e range, or see our \u003ca href=\"\/collections\/threaded-bar\"\u003ethreaded bar\u003c\/a\u003e and \u003ca href=\"\/collections\/throughbolts\"\u003ethroughbolts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNationwide delivery across Ireland – free on orders over €100.\u003c\/p\u003e","brand":"TIMCO","offers":[{"title":"Default Title","offer_id":56425730998614,"sku":"08110CS","price":9.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0302\/0446\/1193\/files\/chemical-anchor-studs-m8-x-110mm-zinc-plated-with-nuts-and-washers-box.png?v=1793448503","url":"https:\/\/www.dynamitehardware.com\/products\/chemical-anchor-studs-m8-x-110mm-zinc-plated-with-nuts-and-washers-box-of-10","provider":"Dynamite Hardware","version":"1.0","type":"link"}