Threaded Bar M8 x 300mm Zinc Plated DIN 975 – Bundle of 10

M8 x 300mm threaded bar – also known as studding or threaded rod – zinc plated to DIN 975, in a bundle of 10. Conveniently pre-cut shorter lengths, commonly used with chemical resin or as custom bolts and studs.

Key features

• Fully threaded, metric coarse thread
• DIN 975
• Zinc plated carbon steel
• Pre-cut 300mm lengths
• Bundle of 10

Specification

Packaging may vary from the image shown. Supplied as specified.

Applications

Suspending cable tray, ductwork and pipework; resin anchoring with chemical resin; custom-length bolts and tie rods with nuts and washers. For internal or dry use.

FAQs

Can I cut threaded bar?

Yes – cut with a hacksaw or grinder, then run a nut over the cut end to clean up the thread.

Is it suitable for chemical anchoring?

Yes – it is commonly cut to length and set in chemical resin. For ready-made studs with a chisel point, see our chemical anchor studs.

What grade is it?

This is standard zinc-plated DIN 975 threaded bar for general use. For structural or high-tensile applications, check the engineer’s specification.

Other sizes and related products

Other sizes in this range: M10 x 1000mm, M12 x 1000mm, M16 x 1000mm, M20 x 1000mm, M6 x 1000mm, M8 x 1000mm, M10 x 300mm, M12 x 300mm, M16 x 300mm, M6 x 300mm.

Browse the full threaded bar range, or see our nuts and chemical anchoring.

Nationwide delivery across Ireland – free on orders over €100.