Larsen FTG 2-20 Flexible Tile Grout Platinum (Silver Grey) 5kg

Larsen FTG 2-20 Flexible Tile Grout, 5kg bag – a trade-range, flexible cement-based wide-joint grout for walls and floors. Classified CG2W to BS EN 13888, it is made with fine fillers for a smooth finish and polymers to resist dirt pick-up, staining, water and mould growth.

Key specifications

• Brand: Larsen (Trade Range)
• Range: FTG 2-20 Flexible Tile Grout
• Colour: Platinum (Silver Grey)
• Pack size: 5kg bag
• Joint width: 2–20mm
• Classification: BS EN 13888 Type CG2W
• Mix: 5kg powder with 1.25L clean water (25%)
• Pot life: approx. 60 minutes at 20°C
• Traffic: light foot traffic after 12 hours; full traffic after 24 hours (site conditions apply)
• Application temperature: +5°C to +30°C
• SKU: WBRM356PL05
• Barcode: 5036879950202

Suitable for

• Ceramic, fully vitrified / porcelain tiles, natural stone and mosaics
• Walls and floors, internal and external use
• Heated screeds and underfloor heating, when current tiling practice is followed
• Power showers and other wet areas

Coverage

Coverage depends on tile size, joint width and joint depth. Larsen’s formula is: coverage (kg/m²) = ((L + B) × W × D × 2.0) / (L × B), where L and B are the tile length and breadth and W and D are the joint width and depth. A coverage calculator is on the Larsen website, or ask us and we’ll work it out for your tiles.

How to use

Allow the tile adhesive to cure before grouting (typically 12–18 hours for standard-set adhesives, or 2–3 hours for fast-set). Joints must be clean and dust-free, and at least 2mm wide. Mix to a smooth paste, work into the joints, then clean off the haze once the grout has stiffened. Follow the technical data sheet.